Bell'O 8325 - Manual (Page 9)

English
R or S
Selected Long Screw
MA
Selected Spacer
DETAILED VIEW
Back of TV
Figure 2
Some TVs have mounting holes that are recessed. This kit includes longer mounting
screws and Spacers (D or E for M4 and M5 screws; P or Q for M6 and M8 screws) for
such instances. The spacers are used to take up the space in the recessed hole as shown in
Figure 2. The spacer you select must stick out past the back of the TV to ensure secure
mounting. You don’t want the spacer to be loose. The Monitor Arms (MA) need to rest
securely on the spacers. Test several of the spacers included in this kit to find the
correct match for the recessed holes in the back of your TV.
Step 2: Securing the Wall Plate
Finding the wood studs to mount to
Using a stud finder, determine the exact
location of the studs to which you want to
attach the Wall Plate (WP). Using an
electronic stud finder works best because it
gives you an indication of where the right and
left sides of the stud are. After you determine
the stud locations, mark the right and left sides
of each stud as shown in Figure 3. These
markings help you determine the center location
of each stud for proper drilling.
Wood
Stud
Figure 3