BT DIVERSE X10 - Manual (Page 80)

Changing the recall mode
The (Recall) button is used when connected to
certain switchboards, e.g. to transfer calls, and for some
BT Calling Features or those services available via your
network provider.
1. Press Menu , then press until Base Settings is
displayed. Press OK .
2. Press until Recall Mode is displayed, then press OK .
Timed Break is displayed.
3. Press to select the required recall mode: Timed Break
or Earth . Press Save .
4. Press to return to the idle display.
Changing the dialling mode
Your BT Diverse X10 is set to tone dialling. If required
you can switch it to pulse dialling.
1. Press Menu , then press until Base Settings is
displayed. Press OK .
2. Press until Dial Mode is displayed, then press OK .
Tone Dial is displayed.
3. Press to select the required dialling mode:
Tone Dial or Pulse Dial . Press Save .
4. Press to return to the idle display.
80 Technical information
BT Diverse X10 – Issue 2 – Edition 02 – 29.10.03 – 5737
5737 Diverse X10 UG [Iss2-1] 5/3/04 10:34 am Page 80