Kramer Electronics TP-107AVR - Manual (Page 2)

Contents
i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Quick Start 2
3 Overview 4
3.1 About the TP-107AVR/TP-122 Kits 4
3.2 Controlling via the RC-108 and RC-116 Presentation Controllers 6
3.3 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP) 6
3.4 About the Power Connect™ Feature 6
3.5 Recommendations for Achieving the Best Performance 7
4 Your Line Transmitter, Receiver and Presentation Controllers 7
4.1 Your TP-107AVR XGA/Audio Line Transmitter 8
4.2 Your TP-122 XGA/Audio Line Receiver 9
4.3 Your RC-108/RC-116 Presentation Controller 11
5 Configuring a TP-107AVR System 13
5.1 Connecting the TP-107AVR/TP-122 Transmitter/Receiver System 13
5.2 Connecting the TP-107AVR/TP-122 BoardView™ Kit 15
5.3 Configuring the TP-107AVR/TP-122 Kit with the RC-108 16
5.4 Wiring the CAT 5 LINE IN/LINE OUT RJ-45 Connectors 17
5.5 Connecting via the K-NET™ 17
5.6 Setting the Address Number of the TP-107AVR 18
6 Controlling the TP-107AVR 19
6.1 Controlling the TP-107AVR/TP-122 Kit via the RC-108 19
6.2 Controlling the TP-107AVR/TP-122 Kit via an RS-485 Controller 19
6.2.1 RS-485 Communication Protocol 21
7 Installing a Remote Button 22
8 Flash Memory Upgrade 23
8.1 Downloading from the Internet 23
8.2 Connecting the PC to the RS-232 Port 23
8.2.1 Connecting the RC-108 to a PC via RS-232 23
8.3 Upgrading the Firmware 24
9 Technical Specifications 29
Figures
Figure 1: TP-107AVR/TP-122 Configuration 5
Figure 2: TP-107AVR XGA/Audio Line Transmitter 8
Figure 3: TP-122 XGA/Audio Line Receiver 9
Figure 4: TP-122 XGA/Audio Line Receiver (Underside) 10
Figure 5: RC-108 Presentation Controller 11