AGFA Scanner - Manual (Page 38)

Appendix B — Using the document feeder option 38
Appendix B — Using the document feeder option
This appendix gives information on the document feeder option and describes how to install,
operate and maintain it.
About your document feeder option
Unpacking the document feeder option
Taking a closer look
Connecting the document feeder option
Operating the document feeder option
Paper loading
Correcting paper jams
Maintaining the document feeder option
Cleaning and replacing the guide flap
Roller cleaning
About your document feeder option
The ADF Automatic Document Feeder is a companion sheet feeder for your SnapScan. It allows
automatic scanning of up to 60 sheets. The dimension of the document can be as large as 211 mm
x 297 mm (8.5 '' x 11.7 ''). Sheets to be scanned are fed from a stack in the ADF's input tray, guided
past the scanner's image sensor, and placed in the feeder's output tray.
The ADF mounts onto the scanner in place of a document cover, using the original document guide
holes of your scanner. The feeder is preloaded by spring plungers so that it can be lowered into
position for auto-feed or lifted off to allow use of the flatbed.
The ADF is a must for high-volume document processing with your SnapScan. It increases
operating convenience and efficiency in multi-page scanning and OCR (Optical Character
Recognition) application.