AVerMedia Technologies EB1304 User Manual
Page 22
18
OSD MENU
Description
2006 / 12 / 11
17 : 54 : 50
ON
ON
ON
OFF
NO
SUBMENU
PASSWORD CHANGE
VIDEO ADJUSTMENT
DATE
TIME
AUTO RECORD
AUTO SCAN
PASSWORD SETUP
AUDIO RECORD
AUDIO MUTE
NTSC
ON
VIDEO SYSTEM
TEMERATURE SET
BUZZER
VIDEO ADJUSTMENT :
Select the camera number and set to adjust the video
brightness, contrast, hue, and saturation value.
1
050
050
000
024
VIDEO ADJUSTMENT
CAMERA
BRIGHTNESS
CONTRAST
HUE
SATURATION
NO
RESET TO DEFAULT VALUE
DATE :
Set the current date.
i
Please set the correct date and time when you
use the DVR system at the first time to make
sure the time of recorded video file is correct.
TIME :
Set the current time.
AUTO RECORD :
Enable/disable auto continue recording when
interrupted (i.e., power breakdown, video playback or
configuration setup). It starts to record after 10 second
of idleness. This is applicable in Always Record mode.
AUTO SCAN :
Enable/disable auto cycle switch to display the next
channel when in full screen preview.
PASSWORD SETUP :
Enable/disable full system password protection. This
would prevent unauthorized user to stop video
recording, change system settings and formatting the
hard disk.
AUDIO RECORD :
Enable/disable audio recording. To record sound,
make sure the microphone is connected to the unit.
i
The audio input device must be power
supplied by external power. The DVR system
doesn’t supply the power to those devices.
AUDIO MUTE :
Enable/disable to hear audio sound. To hear sound,
make sure the unit is connected to a speaker.
i
If you want to hear the voice when you
playback the recorded file on this DVR, please
make sure that you have selected Audio Mute
Off.
VIDEO SYSTEM:
Display the current video system ─ PAL or NTSC