Phottix Odin for Nikon - Manual (Page 9)

9
TTL / M / Off Ratio Functions Screen
While groups A, B or C are selected, pressing
the Mode button will change from TTL, (M)
Manual, or Off functions.
TTL:
Will fire flashes using TTL metering. The
EV level of each group can be adjusted up or
down (see above).
M:
Flashes are set in Manual mode and power
levels adjusted up or down (see above).
Off:
Selecting Off (signified by three
underscores _ _ _) will turn off the selected
group and not fire any remote flashes in that
group.
The Selection Button allows you to cycle
through A:B ratio adjustments, EV adjustments
and Channel selections.
Press the Selection button to access Ratio
adjustments. Press the + / - button until the
desired A:B ratio is achieved.
Pressing the Selection button again will move
the active selection to the EV adjustment
section. Press the + / - button until the desired
EV level is achieved.
The Selection Button can also be used to
navigate to the Channel icon. The - / + buttons
will change the transmission channel (1, 2, 3 or
4) when Channel is selected. This will change
the channel the TCU uses to transmit.
Fast Exit
Pressing the TCU Power Button after making
changes to settings will exit edit mode. The
TCU will save the current settings.
En INSTRUCTION MANUAL