Phottix Odin for Nikon - Manual (Page 4)

4
Upgrading firmware by USB
After turning on the Phottix Odin TCU and
receivers, slave mode does not need to be set
on flashes on Phottix Odin receivers, but flashes
need to be set in TTL mode, Flash Zoom needs
to be set to Auto and AF ILL to ON (see your
flash manual for details).
Ensure there is a good hot shoe connection
between the TCU and camera, and flashes and
receivers for best performance.
Many TTL flashes have been tested but the
manufacturer cannot guarantee that all third
party TTL flashes will function properly with the
Phottix Odin. It has been designed and
optimized for original Nikon flashes using the
i-TTL system. Issues with third party flashes will
not be supported.
Tips:
Turn off all devices – flashes/strobes,
cameras, and the Phottix Odin TCU and
receivers - when connecting and disconnect-
ing devices.
The firmware of the TCU and receivers can be
upgraded using the included USB cable. Any
upgrades and full instructions will be
announced on the Phottix Blog
(journal.phottix.com).
Please Note