Phottix Odin for Nikon - Manual (Page 14)

14
Connecting a flash to the Odin
receiver to studio lights or flashes
by cable
1. Turn off the flash/strobe and the Phottix Odin
receiver.
2. Connect a cable to the receiver’s 3.5 mm
Output Port.
3. Connect the opposite end of the cable to a
flash or studio strobe (A 6.3 mm adapter is
included for studio strobes).
4. Turn on the flash/strobe and the Phottix Odin
receiver.
5. Set the flash to Manual mode – no TTL
functions can be used when a compatible flash
is triggered by cable.