6 presets, 1 recalling a preset, 2 setting a preset – Videoswitch Vi-K3 User Manual
Page 96: 3 clearing a preset, 7 tours, 1 running a tour, 2 programming a tour (pattern), Presets, Tours, Vi-k2/vi-k3 universal keyboard
Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
94
24.6 Presets
24.6.1 Recalling a Preset
• Press
the
PRESET key.
• The display will show the letter “P—”.
• Press one of the number keys 1, 2, 3…16 to select a preset that has previously been stored.
• The dome will move to that preset position.
• If the joystick is moved, the preset display will be cancelled.
24.6.2 Setting a Preset
• Move the dome to the position at which you wish to set a preset.
• Press and hold the ALT key and then press the STORE key.
• The display will show the letter “P—”, flashing.
• Press one of the number keys 1, 2, 3…16 to select a preset.
• Press and hold the ALT key and then press the STORE key to store the preset.
24.6.3 Clearing a Preset
• Press and hold the ALT key and then press the STORE key.
• The display will show the letter “P—”, flashing.
• Press one of the number keys 1, 2, 3…16 to select a preset.
• Press and hold the ALT key and then press the WIPE key to clear the preset.
24.7 Tours
24.7.1 Running a Tour
• Press
the
TOUR key.
• The display will show the letter “t—”.
• Press one of the number keys 1, 2, 3 or 4 to select a tour number.
• The dome will run the tour until the TOUR key is pressed again.
24.7.2 Programming a Tour (Pattern)
To start the tour programming:
• Holding
the
ALT key on, press the PROG key.
• The display will show the letter “t—”, flashing.
• Press one of the number keys 1, 2, 3 or 4 to select a tour number.
• Holding
the
ALT key on, press the PROG key.
• The display shows flashing “rEC”.
• All joystick movements will be recorded until the programming is finished.