Videoswitch Vi-K3 - Manual (Page 88)

Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
86
To finish programming a tour:
• The tour can be finished when the letters “PoS” are displayed, as follows:
• Holding
the
ALT key on, press the PROG key (i.e. without entering another position) to finish the
tour programming.
• The word “Fin” will be displayed, indicating that the tour programming has finished.
• Finally, Holding the ALT key on, press the PROG key to return the display to its normal mode.
Tours can also be programmed via the in-built dome menu (Press
DOME then MENU to access the
menu).
21.7 Menus
The Vi-K2/Vi-K3 has a special mode to make access to dome menus very easy:
• Press
the
DOME key on the Vi-K2/Vi-K3.
• The letters “Do” will appear on the display.
While the “
Do” is being displayed, some of the keys on the Vi-K2/Vi-K3 have special functions as follows:
• Press
the
MENU key to enter the dome user menu.
• Use
the
Up, Down, Left, Right arrow keys to navigate within the dome menu.
• Press
the
OK key to enter a sub-menu or to accept a menu setting.