Videoswitch Vi-K3 - Manual (Page 47)

Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
45
12.7 Presets
12.7.1 Recalling a Preset
• Press
the
PRESET key.
• The display will show the letter “P—”.
• Press one of the number keys 1, 2, 3…16 to select a preset that has previously been stored.
• The dome will move to that preset position.
• If the joystick is moved, the preset display will be cancelled.
12.7.2 Setting a Preset
• Move the dome to the position at which you wish to set a preset.
• Press and hold the ALT key and then press the STORE key.
• The display will show the letter “P—”, flashing.
• Press one of the number keys 1, 2, 3…16 to select a preset.
• Press and hold the ALT key and then press the STORE key to store the preset.
• In the case of Dennard domes, the dome menus may automatically appear so that a text string can
be entered.
12.8 Tours
12.8.1 Running a Tour
• Press
the
TOUR key.
• The display will show the letter “t—”.
• Press one of the number keys 1 or 2 to run a tour (sequence) that has previously been stored.
• The dome will run the tour until the TOUR key is pressed again.
Note if attempting to set a tour on a Dennard 2055 dome using BBV, tours must be set in the dome
menus.
12.9 Menus
The Vi-K2/Vi-K3 has a special mode to make access to dome menus very easy:
• Press
the
DOME key on the Vi-K2/Vi-K3.
• The letters “Do” will appear on the display.
While the “
Do” is being displayed, some of the keys on the Vi-K2/Vi-K3 have special functions as follows: