Innovate Motorsports LM-2 - Manual (Page 25)

Document # 31-0008 LM2_Manual_1.3.doc 25
With our racetrack shaped diagram fresh in mind, let’s look at Low Priority inputs in
practice. In this example the vehicle can provide four LM-2 channels that update at full
MTS rates. Even four channels are still very usable. For example, here is RPM,
SPARKADV (ignition timing), FUEL1_OL (Open Loop Status) and VSS (Vehicle Speed
Sensor):
But what would happen if we also added ECT, IAT, MAF, and MAP? If we left all our
channels at normal priority, some critical channels may not be fast enough for our
purposes: