ATEN ALTUSEN KH1516 - Manual (Page 42)

KH1508 / KH1516 User Manual
28
F4 ADM
F4 is an Administrator only function. It allows the Administrator to configure
and control the overall operation of the OSD. To change a setting use the Up
and Down Arrow Keys to move the highlight bar to it then press [Enter].
After you select an item, a submenu with further choices appears. Move the
Highlight Bar to the choice you want, then press [Enter]. An icon appears
before the selected choice so that you know which one it is. The settings are
explained in the following table:
(Continues on next page.)
Setting Function
SET USERNAME
AND
PASSWORD This function is used to set Usernames and Passwords for the
Administrator and Users:
1. One Administrator and four User passwords can be set.
2. After you select the Administrator field or one of the User fields,
a screen that allows you to key in your password appears. The
password may be up to 15 characters long, and can consist of
any combination of letters and numbers (A - Z, 0 - 9).
3. For each individual, key in the Username and Password, then
press [Enter].
4. To modify or delete a previous Username and/or Password, use
the backspace key to erase individual letters or numbers.
SET LOGOUT
TIMEOUT If there is no input from the console for the amount of time set with
this function, the Operator is automatically logged out. A login is
necessary before the console can be used again.
This enables other Operators to gain access to the computers
when the original Operator is no longer accessing them, but has
forgotten to log out. To set the timeout value, key in a number from
1 - 180 minutes, then press [Enter]. If the number is 0 [zero], this
function is disabled. Default is 0 (disabled).
kh15816-v1.book Page 28 Wednesday, October 25, 2006 11:05 AM