ATEN ALTUSEN KH1516 - Manual (Page 41)

Chapter 4. OSD Operation
27
(Continued from previous page.)
Setting Function
PORT ID
DISPLAY
MODE Selects how the Port ID is displayed: the Port Number alone
(PORT NUMBER); the Port Name alone (PORT NAME); or the
Port Number plus the Port Name (PORT NUMBER + PORT
NAME). The default is PORT NUMBER + PORT NAME).
SCAN
DURATION Determines how long the focus dwells on each port as it cycles
through the selected ports in Auto Scan Mode (see F7 SCAN,
page 33). Key in a value from 1 - 255 seconds, then press [Enter].
Default is 5 seconds; a setting of 0 disables the Scan function.
SCAN/SKIP
MODE Selects which computers will be accessed under Skip Mode
(see F5 SKP, page 32), and Auto Scan Mode (see F7 SCAN, page
33). Choices are:
ALL - All the Ports which have been set Accessible (see SET
ACCESSIBLE PORTS, page 30);
POWERED ON - Only those Ports which have been set
Accessible and are Powered On;
QUICK VIEW - Only those Ports which have been set Accessible
and have been selected as Quick View Ports (see SET QUICK
VIEW PORTS, page 30);
QUICK VIEW + POWERED ON - Only those Ports which have
been set Accessible and have been selected as Quick View Ports
and are Powered On.
The default is ALL.
SCREEN
BLANKER If there is no input from the console for the amount of time set with
this function, the screen is blanked. Key in a value from
1 - 30 minutes, then press [Enter]. A setting of 0 disables this
function. The default is 0 (disabled).
HOTKEY
COMMAND
MODE Enables / Disables the Hotkey Command function in case a
conflict with programs running on the computers occurs. The
default is ON.
kh15816-v1.book Page 27 Wednesday, October 25, 2006 11:05 AM