ACTiSYS ACT IR100SLM User Manual

Page 10

- 9 -

ACT-IR100SL and IR100SL-M User’s Manual

Version 1.20

May 27, 2002

4. Operation Setting, EEPROM, and other optional hardware

4.1 Serial EEPROM

There are some special functions if the external serial EEPROM installed.

The optional serial EEPROM allow users to set ”Host Speed” and “Hardware Flow Control and

Connection Control”. The system initial sequence are shown below:

Note: The serial EEPROM setting can override jumper settings.

System Power ON.

Serial

EEPROM

data is

available?

To get the

Jumper setting

Setting Host

speed…..

YES

Blinking LED