Airedale OnRak 3kW 35kW - Manual (Page 23)

IT Cooling LogiCool
™ OnRak
IT Cooling
23
Technical, Installation and Maintenance Manual :6912497 V1.5.0 02_2013
Installation
IMPORTANT If the unit is dropped, it should immediately be checked for damage and reported to
Airedale.
Positioning
The mating frame is attached to the customers rack. An air tight seal must be placed
between the mating frame and the data enclosure.
The OnRak is then lifted onto the hinges and as
it’s closed will produce an air tight seal.
CAUTION Airedale will accept no responsibility for mishandling during the positioning of the
equipment. The data rack must be mounted level.
IMPORTANT Ensure that the OnRak, the mating frame and data rack are earth bonded together.