KYORITSU 6310 Instruction Manual - Manual (Page 297)

KEW6310 16.9 Specification of Clamp sensor
KEW6310
16.14
＜ KEW8146 ＞ ＜ KEW8147 ＞ ＜ KEW8148 ＞
AC 30Arms (42.4Apeak) AC 70Arms (99.0Apeak) AC 100Arms (141.4Apeak)
AC0 ~ 1500mV(AC50mV/A) AC0 ~ 3500mV(AC50mV/A) AC0 ~ 5000mV(AC50mV/A)
AC0 ~ 30Arms AC0 ~ 70Arms AC0 ~ 100Arms
0 ~ 15A
±1.0%rdg±0.1mV (50/60Hz)
±2.0%rdg±0.2mV (40Hz
~ 1kHz)
15 ~ 30A
±5.0%rdg (50/60Hz)
±10.0%rdg (45
~ 1kHz)
0 ~ 40A
±1.0%rdg±0.1mV (50/60Hz)
±2.0%rdg±0.2mV (40Hz
~ 1kHz)
40 ~ 70A
±5.0%rdg (50/60Hz)
±10.0%rdg (45
~ 1kHz)
0 ~ 80A
±1.0%rdg±0.1mV (50/60Hz)
±2.0%rdg±0.2mV (40Hz
~ 1kHz)
80 ~ 100A
±5.0%rdg (50/60Hz)
±10.0%rdg (45
~ 1kHz)
-------------------
23±5°C, relative humidity 85% or less (no condensation)
0 ~ 50°C, relative humidity 85% or less (no condensation)
-20 ~ 60°C, relative humidity 85% or less (no condensation)
AC30Arms (50/60Hz) AC70Arms (50/60Hz) AC100Arms (50/60Hz)
approx 90Ω approx 100Ω approx 60Ω
indoor use, altitude 2000m or less
IEC 61010-1, IEC 61010-2-032
Measurement CAT.III (300V), Pollution degree 2
IEC61326
AC3540V/ 5 sec
between Jaws - enclosure
between enclosure – output terminal
between Jaws – output terminal
50MΩ or more/ 1000V
between Jaws – enclosure, between
enclosure – output terminal,
between Jaws – output terminal
Φ24mm Φ40mm Φ68mm
100(L) × 60(W) × 26(D)mm 128(L) × 81(W) × 36(D)mm 186(L) × 129(W) × 53(D)mm
approx 2m
MINI DIN 6PIN
approx 150g approx 240g approx 510g
Instruction manual,
Cable marker
7146 (Φ4 Banana plug),
7185 (Extension lead)