3 12v power connector, 5 mounting the lcd-kit series monitor, Ounting the – IEI Integration LCD-KIT Series v2.00 User Manual
Page 55: Lcd-kit, Eries, Onitor, Figure 5-2: dvi-d connector, Figure 5-3: 12v power connector, Table 5-3: dvi-d connector pinouts, Lcd-kit page 45

LCD-KIT
Page 45
Pin Description
Pin
Description Pin
Description
1
TMDS Data2-
9
TMDS Data1-
17
TMDS Data0-
2
TMDS Data2+
10
TMDS Data1+
18
TMDSData0+
3
TMDS Data2/4 Shield
11
TMDS Data1/3 Shield
19 TMDS
Data0/5
Shield
4
TMDS Data4-
12
TMDS Data3-
20
TMDS Data5-
5
TMDS Data4+
13
TMDS Data3+
21
TMDS Data5+
6
DDC Clock [SCL]
14
+5 V Power
22
TMDS Clock Shield
7
DDC Data [SDA]
15
Ground (for +5 V)
23
TMDS Clock +
8
Analog vertical sync
16
Hot Plug Detect
24
TMDS Clock -
Table 5-3: DVI-D Connector Pinouts
Figure 5-2: DVI-D Connector
5.4.3 12V Power Connector
Use the rear panel +12V DC (or 9~36V DC on M models) jack to connect the monitor to a
power source.
Figure 5-3: 12V Power Connector
5.5 Mounting the LCD-KIT Series Monitor
Each LCD-KIT series monitor comes with a preinstalled mounting bracket with a number
of holes available for mounting purposes that system integrators will find especially useful.
Refer to Sections 2.4 and 2.5 for further details on the number and location of mounting
holes for each model of the LCD-KIT series monitor.