3 packing list, 3 pre-installation preparation, 1 tools – IEI Integration LCD-KIT Series v2.00 User Manual
Page 53: Installation, Reparation

LCD-KIT
Page 43
5.2.3 Packing List
All the monitors in the LCD-KIT series are shipped with the following components:
1 x LCD-KIT series monitor.
1 x AC Power cable
1 x VGA Cable
1 x 50W AC Power Adapter (LCD-KIT190G / 170 / 150 / 121)
1 x 35W AC Power Adapter (LCD-KIT104GH / 84 / 65)
5 x Replacement Round Head Screw
5 x Replacement Flat Head Screw
5 x Replacement Wire Strain Band
1 x User Manual on CDROM
If any of these items are missing or damaged, contact the distributor or sales
representative immediately.
5.3 Pre-installation Preparation
5.3.1 Tools
Before installing the LCD-KIT series monitor, make sure the following tools are on hand:
Philips (crosshead) screwdriver: All the retention screws on the system are
Philips screws.
Soft working mat: When the LCD-KIT series monitor is installed, the screen
is placed on the working surface. It is therefore important to rest the MPC
industrial workstation on a soft mat that cannot damage the LCD screen on
the front of the LCD-KIT series monitor.