IEI Integration AFL-15A_15AE-N270_UMN_v1.01.pdf - Manual (Page 67)

AFOLUX AFL-15A-N270 Panel PC
Page 67
Step 4: Lift the cover off the AFL-15A-N270. Step 0:
5.4.2 Internal Aluminum Cover Removal
To remove the internal aluminum cover, follow the steps below.
Step 1: Remove the retention screws securing the internal aluminum cover. Figure 5-2
shows the aluminum cover retention screws of the AFL-15A-N270.
Figure 5-2: Aluminum Back Cover Retention Screws
Step 2: Lift the aluminum cover off the AFL-15A-N270 series. Step 0:
5.5 Replacing Components
5.5.1 Memory Module Replacement
The flat panel PC is preinstalled with a 1.0 GB DDR2 memory module. If the memory
module is fail, follow the instructions below to replace the memory module.
Step 1: Remove the back cover. See Section 5.4.1 above.
Step 2: Remove the internal aluminum back cover. See Section 5.4.2 above.
Step 3: Locate the DDR2 SO-DIMM on the motherboard (Figure 5-3).