IEI Integration AFL-15A_15AE-N270_UMN_v1.01.pdf - Manual (Page 43)

AFOLUX AFL-15A-N270 Panel PC
Page 43
Step 7: Replace the aluminum back cover to the chassis.
Step 8: Replace the plastic back cover. Step 0:
4.8 AT/ATX Mode Selection
AT and ATX power modes can both be used on the AFL-15A-N270 series. The selection
is made through an AT/ATX switch on bottom panel (Figure 4-5). To select AT mode or
ATX mode, follow the steps below.
Step 1: Locate the AT/ATX switch on the bottom panel (Figure 4-5).
Figure 4-5: AT/ATX Switch Location
Step 2: Adjust the AT/ATX switch. Step 0:
4.8.1 AT Power Mode
With the AT mode selected, the power is controlled by a central power unit rather than a
power switch. The AFL-15A-N270 panel PC turns on automatically when the power is
connected. The AT mode benefits a production line to control multiple panel PCs from a
central management center and other applications including:
ATM
Self-service kiosk
Plant environment monitoring system
Factory automation platform
Manufacturing shop flow
4.8.2 ATX Power Mode
With the ATX mode selected, the AFL-15A-N270 panel PC goes in a standby mode when
it is turned off. The panel PC can be easily turned on via network or a power switch in