5 removing the rear panel, 6 cf card installation, Emoving the – IEI Integration AFL-15A_15AE-N270_UMN_v1.01.pdf User Manual

Page 40: Anel, Nstallation, Figure 4-1: back cover retention screws

AFOLUX AFL-15A-N270 Panel PC

Page 40

4.5 Removing the Rear Panel

To access the AFL-15A-N270 internally the rear panel must be removed. To remove the

rear panel, please follow the steps below.

Step 1:

Remove the 16 retention screws (Figure 4-1).

Figure 4-1: Back Cover Retention Screws

Step 2:

Lift the cover off the AFL-15A-N270 panel PC.

Step 0:

4.6 CF Card Installation

The AFL-15A-N270 series has one CF Type II slot inside the rear panel. To install the CF

card, follow the instructions below.

Step 1:

Remove the back cover. See Section 4.5.

Step 2:

Locate the CF slot in the left panel.

Step 3:

Insert a CF card into the slot (Figure 4-2).