IEI Integration AFL-15A_15AE-N270_UMN_v1.01.pdf - Manual (Page 65)

AFOLUX AFL-15A-N270 Panel PC
Page 65
5.1 System Maintenance Introduction
If the components of the AFL-15A-N270 series fail they must be replaced. Components
that can be replaced include:
CF Module
Bluetooth module
Wireless LAN module
SO-DIMM module
Please contact the system reseller or vendor to purchase the replacement parts. Back
cover removal instructions for the AFL-15A-N270 series are described below.
5.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
AFL-15A-N270 may result in permanent damage to the AFL-15A-N270
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL-15A-N270. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the panel PC is accessed internally, or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.
Wear an anti-static wristband: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: - When configuring the AFL-15A-N270, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
AFL-15A-N270.