beautypg.com

Figure 4-3: hdd bracket retention screws, Figure 4-4: afl-15a-n270 hdd retention screws – IEI Integration AFL-15A_15AE-N270_UMN_v1.01.pdf User Manual

Page 42

background image

AFOLUX AFL-15A-N270 Panel PC

Page 42

Figure 4-3: HDD Bracket Retention Screws

Step 4:

Attach the HDD brackets to the HDD. To do this, align the four retention screw

holes in the base of the HDD bracket with the retention screw holes on the

bottom of the HDD. Insert four retention screws into the HDD bracket

(Figure 4-4).

Figure 4-4: AFL-15A-N270 HDD Retention Screws

Step 5:

Insert the rear of HDD into the SATA connector on the motherboard.

Step 6:

Secure the HDD to the AFL-15A-N270 by aligning the retention screw holes in

the HDD brackets with the retention screw holes on the chassis. Insert the four

retention screws.

See also other documents in the category IEI Integration Computers: