beautypg.com

4 com1 pin 9 setting, Figure 3-6: clear cmos jumper, Table 3-3: clear cmos jumper settings – IEI Integration AFL-15i-HM55 v1.20 User Manual

Page 39: See table 3-3, See figure 3-6, N in table 3-3

background image

AFL-HM55 Series Panel PC

Page 28

Short 2 - 3

Clear CMOS Setup

Table 3-3: Clear CMOS Jumper Settings

The location of the clear CMOS jumper is shown in Figure 3-6 below.

Figure 3-6: Clear CMOS Jumper

3.9.4 COM1 Pin 9 Setting

Jumper Label:

JP7 and JP8

Jumper Type:

6-pin header

Jumper Settings:

See Table 3-4 and Table 3-5

Jumper Location:

See 1Figure 3-7 and Figure 3-8

Two jumpers (JP7 and JP8) configure pin 9 on COM1 and COM3 DB-9 connectors. Pin 9

on the COM1 and the COM3 DB-9 connectors can be set as the ring (RI) signal, +5 V or

+12 V. The COM1 and COM3 Pin 9 Setting jumper selection options are shown in the

tables below.

See also other documents in the category IEI Integration Computers: