3 installation and configuration steps, 4 removing the hdd cover, Nstallation and – IEI Integration AFL-15i-HM55 v1.20 User Manual

Page 31: Onfiguration, Teps, Emoving the, Over

AFL-HM55 Series Panel PC

Page 20

3.3 Installation and Configuration Steps

The following installation steps must be followed.

Step 1:

Remove the HDD cover

Step 2:

Install a SATA DOM card

Step 3:

Install an HDD

Step 4:

Remove the rear panel cover

Step 5:

Remove the internal aluminum cover

Step 6:

Configure the system jumpers

Step 7:

Connect peripheral devices to the bottom panel of the flat panel PC

Step 8:

Mount the flat panel PC

3.4 Removing the HDD Cover

Step 1:

Remove one (1) retention screw on the cover. See Figure 3-1.