3 rack/cabinet mounting – IEI Integration PPC-5152-D525 v2.10 User Manual

Page 50

PPC-5152-D525 Falt-bezel Panel PC

Page 36

Figure 3-19: Tighten the Panel Mounting Clamp Screws

3.10.3 Rack/Cabinet Mounting

The PPC-5152-D525 panel PC can be installed into a rack or cabinet. The installation

procedures are similar to the panel mounting installation. To do this, please follow the

steps below:

NOTE:

When purchasing the cabinet/rack installation bracket, make sure it is

compatible with both the PPC-5152-D525 flat panel PC and the

rack/cabinet into which the PPC-5152-D525 is installed.

Step 1:

Slide the rear of the PPC-5152-D525 panel PC through the rack/cabinet bracket

until the aluminum frame is flush against the front of the bracket (Figure 3-20).