IEI Integration UPC-V312-D525 v1.10 - Manual (Page 38)

UPC-V312-D525 Panel PC
Page 25
Step 4: Install the USB dongle. Correctly align the USB dongle with the connector and
insert the USB dongle into the connector.
Figure 3-6: Internal USB Port Installation
Step 5: Reinstall the internal USB port cover. Step 0:
3.6 Mounting the System
WARNING:
When mounting the panel PC onto an arm or onto the wall, it is better
to have more than one person to help with the installation to make sure
the panel PC does not fall down and get damaged.
The panel PC is VESA (Video Electronics Standards Association) compliant and can be
mounted on an arm, a stand or a bracket with a 100 mm/75 mm interface pad. M8 and M4
mounting screws can both be used for VESA mount. The VESA mount retention screw
holes of the UPC-V312-D525 are shown in Figure 3-7.