Codes - short keys camera ir-remote control – WolfVision EYE-14 User Manual User Manual

Page 27

#31

#33

#39

#28

#27

#19

#34

#30

#29

#22

#37

#38

#32

#26

#36

#35

#25

#23

#20

#21

#24

#40

#43

#42

#44

#41

Storing presets:
Press the desired PRESET key (#27) for 2 seconds.

Recalling presets:
Press the desired PRESET key (#27) quickly.

Activating the on-screen menu:
Press the MENU key (#43) to activate the on-screen
menu. Use the Navigation keys (#21 and #42) to
navigate and OK key (#22) to select. For the help
function, press the ? HELP key (#20).
For resetting only the selected item press the ? HELP
key (#20)

Activating the on-screen Extra menu:
Press the MENU key (#43) and keep it pressed until
the extra menu appears

Resetting the output mode to the default of "XGA
at 60Hz":
Keeping the POWER key (#44)pressed for more than
4 seconds.

Change IR code:
Change the IR code in the

"Advanced

Settings / Miscelaneous Settings" and set the "IR
Code" to A, B, C or D (code A is default). To change the
IR code on the remote control, simultaneously
press ress PRESET 1, PRESET 2 keys

and the

ZOOM TELE key

ress PRESET 1, PRESET 2 and

ZOOM WIDE

on-screen menu

(#27)

(#34). Each time this key

combination is used, the code switches from A to B, C,
D ... A ... in the order given.
For resetting the remote control to code A,
simultaneously p

The LED on the remote control shows the selected
code (it flashes one time for code A, two times for code
B, three times for code C and four times for code D).

Resetting the output mode to the default of "XGA
at 60Hz":
Keeping the POWER key (#4)pressed for more than 4
seconds

CODES - Short Keys

Camera

IR-Remote Control