Rear panel, Aoe-212n, Audio over ethernet – Inter-M AOE-212N User Manual
Page 8: Output input

AUDIO OVER ETHERNET
6
AOE-212N
Rear Panel
Rear Panel
1. AC INLET
Terminal which inputs the AC power.
2. POWER SWITCH
Switch turning On/Off the AC Power.
3. DC INPUT TERMINAL
Backup battery(24DC) connecting terminal. In case of black out of AC power, connected backup
battery supplies the power to the device. DC 24V input supplies the power to the set regardless of switch On/Off.
4. AUDIO OUTPUT TERMINAL
It consists of 2-channel with balance outputs (Hot, Cold, GND) with transmitted audio output terminal.
5. AUDIO INPUT TERMINAL
It consists of 2-channel with balance outputs (Hot, Cold, GND) with audio output terminal to be
transmitted.
6. AUDIO INPUT VOLUME
Control the volume of input audio signal.
Control level is (-10dB ~ +10dB)
7. CONTACT POINT INPUT AND OUTPUT TERMINALS
If contact point signal is inserted in each contact point terminal of transmit AOE-212N device,
contact point signal will be transmitted from the contact point output terminal of transmit AOE-212N device.
Input contact point: Contact point signal can be inserted if pin of each channel is short.
Output contact point: Same signals with input signal will be transmitted on the input contact point of transmitter.
CONTACT OUTPUT
RS-232C
10/100M BASE-T
RS-422
RESET
AC INPUT 220V~ 60Hz
H C G
H C G
CH1
H C G
CH2
CH1
CH2
TX
+
TX RX
+
RX
MIN MAX
VOLUME
VOLUME
H C G
MIN MAX
POWER
OFF
ON
DC INPUT
24V
OUTPUT
INPUT
1
2
3
5
9
6
7
8
4
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
CONTACT
INTPUT
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Output
Input