Inter-M AOE-212N - Manual (Page 10)

AOE-212N 2
AUDIO OVER ETHERNET
8
Equipment setting using AOE-212N internal CGI server Equipment setting using AOE-212N internal CGI server
It provides the web-page to check the status and control of AOE-212N.
1. Accessing AOE-212N Web-page
1.1 Access to the web-page by using internet browser (Explorer, Chrome, FireFox, etc.)
1.2 Insert the IP address displayed on the front LCD of AOE-212N. If it is connected normally,
user verification window will pop-up.
1.3 User verification is required to access the AOE-212N web-page.
Default value for factory setting is as below.
User name: admin, password: 1(number).
 Please be sure to change the password after the connection you use.
2. Network Setup
Content Default Sample Value
MAC address Display the MAC address the device. 00:1D:1D:NN:NN:NN
Host name
Displays the name of device. If it displays the location of device,
management will be convenience. Text only (Incl. digits, no space)
is applicable.
aoe-212n
IP address
Setup the IP address of device. There are two ways“: Dynamic
IP assignment from DHCP Server” and “Manual Setting”
Manual Setting
IP address Setting a Static IP address 192.168.1.99
Subnet Mask Setting to the Subnet mask. 255.255.255.0
Gateway Setup the gateway of network connected to the gateway. 192.168.1.1
DNS 1 server Setup the address of DNS1 server. 168.126.63.1
DNS 2 server
Setup the address of DNS2 server. Follow the setup of property
setup of device.
168.126.63.2
Set
Apply and save the changed contents by using the
button after changing the setup of SET device.
Clear Restore all setups to default values by using button