IntelliTrack Check In/Out - Manual (Page 23)

Chapter 2
Device Setup
13
To add or edit a mapped value to a function key, select the desired
function key from the drop-down list (i.e., F1, F2, F3, etc.) and enter
the value (ASCII character sequence) according to
Table 1 in the text
box next to it via the LXE device keyboard. Tap the Add button. The
value will appear in the FNKey/Action table. Once function keys F1
through F10 are mapped according to
Table 1 , tap OK to close the Con-
figure screen.
16. Select Session > Connect to connect to the server. A blank screen
appears. Enter STARTRFS on the LXE Keyboard to start the RF
Server and then tap Enter.
17. Once the RF Server connection is established, enter your IntelliTrack
RF Login.
Configuring Wavelink TelnetCE with
IntelliTrack RF
The IntelliTrack RF application may be used with Wavelink TelnetCE to
work with IntelliTrack RF on a Falcon® 4420 device or a Symbol® MC
9000 device. In order for it to work together properly, you must configure
Wavelink TelnetCE after it is installed on your PC and then send the con-
figuration to the Wavelink application on the device.
Open Wavelink on the PC workstation by clicking Start > Programs >
Wavelink TelnetCE > Wavelink TelnetCE program. The Wavelink
Product Configuration screen appears.
F9 ^[[20^M
F10 ^[[21^M
TABLE 1. LXE Terminal Function Key Values (Continued)
Function Key Value