Aiwa NSX-MTD9 - Manual (Page 27)

REPEAT play
A single disc or all the discs can be played repeatedly
Press RANDOM/REPEAT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play - RANDOM lights up on the display.
REPEAT play - lights up on the display.
RANDOM/REPEAT play - RANDOM and light up on the display
Cancel - RANDOM and disappear from the display.
To play all discs, press to start play.
To play a single disc, press DISC DIRECT PLAY, then press
one of the numbered buttons 1-5 within 3 seconds to start play.
During random play it is not possible to skip to the previously played track with the .
BLANK SKIP PLAY
The silent portions between tracks recorded on a CD can be skipped during playback.
1 Press CD BLANK SKIP.
"CD BLANK SKIP ON" is displayed and a small dot will appear in the display.
2 Press to start playback.
The silent portions between tracks will be skipped, and the sound will be played back without interruption. If a track
fades out (ends with the sound gradually decreasing), the fade-out portion also will be skipped.
To return to normal playback
Press CD BLANK SKIP again so that "CD BLANK SKIP OFF" is displayed, and the dot in the display will
disappear.
• There may be a case where BLANK SKIP PLAY does not function correctly.
• BLANK SKIP PLAY is automatically canceled when performing Al EDIT RECORDING (page 21),
PROGRAMMED EDIT RECORDING (page 22), or PROGRAMMED PLAY recording (page 15) or RANDOM
PLAY recording (page 14).
CD PLAYING (cont.) pg. 15