INTELLINET NETWORK NSC15-WG User Manual - Manual (Page 101)

- 101 -
The remote log function uses the Syslog
Protocol, which is a standard for forwarding
log messages in an IP network. Syslog is a
client/server protocol. The Syslog sender (the
Network Camera) sends a small (less than
1KB) textual message to the Syslog server.
This user manual shows one example of a
Syslog server, the 3CDaemon utility by 3Com Corporation (Download Location:
http://support.3com.com/software/utilities_for_windows_32_bit.htm).
After the installation of 3CDaemon, the main program window opens and the
program is ready to receive Syslog messages from the network camera.
The messages shown here are the same messages that are displayed in the
Web browser.