INSTEON Wireless Thermostat with Humidity (2441ZTH) Manual - Manual (Page 9)

Page 9 of 27 Rev: 1/21/2014 8:36 AM
Note: The start of one program mode is also the end of the previous program mode.
Third press of Program:
Cool setpoint
• Up/Down arrows cycle through temperature
• Press and hold scrolls through temperatures
Fourth press of Program:
Heat setpoint
• Up/Down arrows cycle through temperature
• Press and hold scrolls through temperatures
Fifth press of Program:
Restarts the process to program another Mode/Day.
NOTE: The four modes come preprogrammed. The defaults are for all days:
Day
Modes
Start Time
Thermostat
Mode
Heat
Setting
Cool
Setting
Wake 6:00AM Auto 65°F 18°C 75°F 24°C
Leave 8:30AM Auto 60°F 16°C 80°F 27°C
Return 5:00PM Auto 65°F 18°C 75°F 24°C
Sleep 11:00PM Auto 60°F 16°C 80°F 27°C
Note: To exit program setup mode, press Mode button once.
Fan and Hold Button Operations
Fan button operations
• The Fan button is only functional when INSTEON Wireless Thermostat is linked to an INSTEON
Thermostat
• The Fan button cycles between Auto and Always On
• On the display, it simply indicates the text “Fan Always” when selected. There is no text for Auto.