Biamp CI-1 - Manual (Page 8)

8
INSTALLATION
The CI­1 requires one rack space 1.75 inches (44.45mm) high and 19 inches (483mm) wide with 10 inches (254mm) depth. Mounting
the unit using four screws with washers will prevent marring of the front panel. PVC or nylon washers are appropriate.
Please install the unit away from heat sources, such as vents and radiators, and in rooms with adequate ventilation. Ensure that air can
circulate freely behind, beside, and above the unit. Do not exceed the maximum ambient operating temperature of 32­113 degrees F
(0­45°C).Beware of conditions in an enclosed rack that may cause the temperature to exceed ambient room conditions.
Note: To operate correctly, the CI­1 requires an accompanying LSI­16 plus connections to external components and devices as described
in this manual.The CI­1 should be mounted in close proximity to the accompanying LSI­16.
For EN 54­16 compliance, refer to the Vocia VACIE Reference Guide which details mandatory installation requirements.