Specifications, Tec-1 specifications, Tec-1s specifications – Biamp TEC-1 User Manual
Page 14: Tec-1i specifications
14
TEC-1 SPECIFICATIONS
TEC-1s SPECIFICATIONS
Dimensions:
5.1”H x 4.7”W x 1.25”D (130mm x 120mm x 32mm)
Weight:
0.5 lb (0.2kg)
Power consumption:
PoE Class 1 (3.2W @ full display utilization)
Material:
PVC/ABS
Control cable requirements:
Unshielded twisted pair (UTP) wiring, 100BaseT interface (CAT-5/6/7 Ethernet cable) using either RJ45 or
Insulation Displacement Connector (IDC)
Control cable length:
330’ (100m) Ethernet cable length can be extended with standard PoE network technology
Devices per system:
Remote Ethernet Devices
(including NPS-1) per system
Remote Ethernet Devices
per Tesira unit
128
24
Control wiring topology:
Standard Ethernet network wiring
Control programming:
Each control configured for specific operation by the system design software
Compliance:
EU Directive 2002/95/EC (RoHS Directive)
CE marked
FCC
TEC-1i SPECIFICATIONS
Dimensions:
6.22"H x 5.82"W x 0.5"D (158mm x 148mm x 12.7mm)
Power consumption:
PoE Class 1 (3.2W @ full display utilization)
Control cable requirements:
Unshielded twisted pair (UTP) wiring, 100BaseT interface (CAT-5/6/7 Ethernet cable) using either RJ45 or
Insulation Displacement Connector (IDC)
Control cable length:
330' (100m) Ethernet cable length can be extended with standard PoE network technology
Control wiring topology:
Standard Ethernet network wiring
Control programming:
Each control configured for specific operation by the system design software
Compliance:
EU Directive 2002/95/EC (RoHS Directive)
CE marked
FCC