Biamp TEC-1 - Manual (Page 11)

11
TEC-1i INSTALLATION
Flush Mount Installation
The TEC-1i may be flush mounted using the retrofit plate (provided with the product) or a Raco
® 254 box
(purchased from an electrical distributor). To install the TEC-1i, a hole must be cut in the wall to accommodate
the Raco 254 box or to use the retrofit plate. See the figures below.
SECTION A-A SECTION A-A
11.75cm
12.07cm
4 5/8″
4 3/4″
Wall cut out dimensions
Mounting using a Raco 254 box Mounting using the retrofit plate