Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, 508 & 750) Installation - Manual (Page 15)

1 Page 1 - 10 TANK SENTINEL ® INSTALLATION GUIDE
TSP-LL2 Probe Floats
Floats for 4-inch (101.6 mm)riser pipes, order:
TSP-IGF4 for Gasoline, or TSP-IDF4 for Diesel and fuel oils.
Floats for 2-inch (50.8 mm)riser pipes, order:
TSP-IGF2 for Gasoline, or TSP-IDF2 for Diesel and fuel oils, or
TSP-SSP stainless steel float for Chemical products.
Manufacturers’ Tank Chart for each Tank
The manufactures’ Tank Chart and other documentation will be used for installation
and programming, and possibly, for future reference. Keep this information — do
not discard it!
TABLE 1-2: Approved Leak Detection Sensors
Order: See sensor manuals for materials required and installation details.
TSP-EIS (Electro-optical Interstitial liquid – Standard sensor)
TSP-ULS (Universal Liquid – Standard sensor)
TSP-HLS / (High product Level – Standard sensor)
TSP-HLST
TSP-HIS / (Hydrostatic Interstitial reservoir – BriteSensor)
TSP-HIS-XL
TSP-DIS (Discriminating Interstitial liquid – BriteSensor)
TSP-DDS (Discriminating Dispenser Sump – BriteSensor)
TSP-DTS (Discriminating Turbine Sump – BriteSensor)
TSP-DVS (Discriminating Vapor – BriteSensor)
TSP-MWS (Discriminating Monitoring Well – BriteSensor)
BriteSensors ® are
sensors that digitally
communicates the
sensor–type and
alarm status of the
sensor. Most
BriteSensors can
discriminate between
water and
hydrocarbon products
and produces
different alarm codes
for each.
Brite Sensors are
not approved for
use in European
Union markets
where ATEX
approved devices
are required.
Standard sensors
do not use digital
data. They operate
like an ON–OFF
switch which is closed
when no liquid is
present and open
when a liquid is
detected.
T
S P -U
LS
T SP-HLS
TSP-HIS
T
S
P
-E
IS
T
S
P
-D
IS
TSP-DDS
TSP-DTS
T
S
P
-D
V
S
TSP-MWS
NOTE