IMP Pumps NMT(D) SMART (C) - Manual (Page 18)

-18-
GB
Key
Short press:
• To confirm currently selected values of both mode and parameter.
Long press:
• 3 seconds to trigger mode selection,
• 5 seconds together with long press on and keys to restore pump to
factory settings.
Key
Short press:
• Scrolling through parameters upwards when not changing parameter
values,
• Scrolling through modes upwards when mode selection is selected,
• Changing parameters downwards when setting parameter values.
Long press:
• 3 seconds together with key to select night mode,
• 5 seconds together with and keys to restore pump to factory
settings.
5.4. Operation and setting of pump modes
For transition between modes (except for night mode), we hold the key for
3 seconds and then select the mode in which we wish the pump to operate
with or keys. We confirm the selection with the key.
After confirming the mode, the parameter, that can be set in this mode will
automatically be chosen and displayed (except for auto mode). If necessary,
we set the parameter value with and keys, and then confirm the setting
with the key or just press the key.
To turn on and turn off the night mode, we simultaneously press and
keys and hold them for 3 seconds.
We can scroll through the parameter values within a mode with and
keys. We select the parameter that can be adjusted (see individual mode) in
the mode with the key and set the desired value with and keys. We
confirm the selected value with the key.