IPX DDK-1700BC - Manual (Page 49)

49
 Changing the System Settings — ICR.
Follow the steps below to change the IR cut function settings.
1. Click on the ICR button on the left side of the “System” page to enter the “ICR” page.
2. Select option for
“IR-Cut Removable filter trigger condition”:“Automatic”, “Day Mode”, “Night Mode”
or “Schedule”.
3. Select IR light power “Off”, “On”, “Sync, with ICR” or “Schedule”.
4. Click the Submit button to save the new settings.
Functions:
Automatic Day/Night mode will change automatically depending on lighting
conditions.
Day mode Day mode disables the IR Cut Filter.
Night mode Night mode enables the IR Cut Filter.
Schedule mode Sets the Day/Night mode using a schedule. Starting time begins Day
mode end time returns to the Night mode.