IPX DDK-1700BC User Manual
Page 48

48
Changing the System Settings
— Digital Input &Output.
1. Click on the DI and DO
button on the left side of the “System” page to enter the “DI and DO” page.
2. Select the active state of the Digital Input 1 from the drop-down list.
3. Select the active state of the Digital Output 1 from the drop-down list.
4. Click to set the LED
“On” or “Off’.
5. Click the Submit
button to submit the new user’s settings.
Functions:
Digital Input:
Select “N.O.” or “N.C.” as the active state of the Digital Input, in order to
use the GPIO connector function.
Digital Output:
Select “N.O.” or “N.C.” as the active state of the Digital Output, in order to
use the GPIO connector function.
LED
Select “ON” or “OFF” to turn this function on and off.