IPX DDK-1700BC User Manual
Page 37
37
1.
Click the PPPoE button on the upper left menu to enter the
“PPPoE Settings” page.
2.
Activate
the “Enable” or “Disable” status of the PPPoE Settings.
3.
Enter the PPPoE
“Username” and the PPPoE “Password” then confirm the password again.
4.
Click on the Submit button to save the setting.
NOTE: Please refer to section 4.1.3.8 (PPPoE & DDNS) for more details.
Functions:
PPPoE Setting
If you use the DDK-1700BC to connect directly to the Internet, you will
need to enter the username and password which were given to you when
you set up your account with your Internet Service Provider. If the
DDK-1700BC is behind a router or a gateway you do not need to configure
this setting.
Username:
Enter Username here
Password:
Enter Password here