IPX DDK-1000 - Manual (Page 76)

5. List of cameras and its groups:
The users can use the icons above
the list to change the groups’ names,
the devices’ titles and the channels’
display modes.
6. Display area: Click the title of the
camera, and you will see the live
image in this area.
7. Device Recording: Click the “Start Record” button to start the recording mode and click
the “Config Record” button to set the details of the recording below.
9. e “Device Panel” and “Web page”
The web page (please refer to section 5.1 for more details):
8. Status of the speed dome controller.
You can interchange between two buttons here: th
buttons.
10. Device information: The user can read a camera’s information, such as “Site Name”,
“Group Name”, “IP Address”, “HTTP Port”, “Device type”, “Monitor Alarm Process” and
the “ Connect Mode”.
11. Recording Scheduler: Shows the recording information of the selected channel.
74