IPX DDK-1000 - Manual (Page 55)

5.1.8 PPPoE & DDNS
Using the PPPoE
1. Install the XDSL software (obtained from your ISP dealer) in your PC.
2. Search your Ipxcam's IP address: you can use your Network Viewer's Scan IP program, or
just connect the Ipxcam and the Video monitor. The monitor screen will show the IP address
on its right side.
3. Change the switch on the Ipxcam's side panel to position # 4.
4. Installing an IP address in your PC or notebook.
s
“192. 168. 1.101” (the first three parts must be
i
(a
5. k step # 2
Desktop
→ Move the mouse focus to the Network neighborhood and click the right key of the
mouse
→ Choose the properties → Choose your local connection → Choose the propertie
and select the configuration
→ Select the TCP / IP → Choose the properties → Type in the
IP address in a four-part formula, for example
dentical to the above numbers, only the last part can be changed to your own number, which
must never exceed 255)
→ Click the mask and the mask input, namely “255. 255. 255. 0”
fixed formula)
→ Click “OK” → Click “OK”.
Desktop
→ Choose IE browser → Type in the Ipxcam IP address in the URL (chec
above)
→ Enter → Ipxcam images will appear.
PPP
lick “OK’.
rd”
ain you’ll get a new IP address).
oE Settings
1. Enter the Ipxcam home page
→ Choose the network → Type in “User Name: root” and
“Password: Admin”
→ C
2. Choose PPPoE
→ PPPoE mode: Select “ON” → Type in “Account” → Type in “Passwo
→ Submit → Unplug the power connection.
3. Plug in the Ipxcam and it will receive an IP address from the ISP dealer (this IP address is
dynamic --- every time you unplug and plug in ag
53