2 install the ip surveillance in your pc – IPX DDK-1000 User Manual
Page 58

5
y running in the selected PC.
2. Insert the supported CD in the CD-ROM drive. The program will execute the installation
w the on-screen instructions to proceed with the rest of the installation
omatically. Please click “Accept”
3. After the installation is complete, pop up the START menu from your computer, and point
ance
program.
l
ectory.
2. Open the extracted folder. The folder contains 1 file.
3. Click on the
icon to execute the installation and then follow the on-screen
nd point to
Programs / IP surveillance to start the IP surveillance program.
NOTE: Please make sure the TCP/IP communication software has been properly
set and configured in your computer. To check your TCP/IP settings, please
refer to section 4.5 (TCP/IP configuration setting).
.2.2 Install the IP surveillance in your PC
Install the IP surveillance from the supported CD-R.
1. Exit all applications currentl
automatically. Follo
procedure as they appear.
NOTE: It will update the .NET Framework to version 2.0 aut
to continue.
to Programs / IPX IP-surveillance / IP surveillance to open up the program selection
page as shown below. Click the IP surveillance tag to start the Ipxcam IP surveill
Insta l the IP surveillance for the ZIP file.
1. Save the ZIP file to your PC and extract the file to a designated dir
instructions to proceed with the rest of the installation procedure.
4. After the installation is complete, click the START menu from your computer, a
56