Appendix 1, How to run ddk-1700d upnp – IPX DDK-1700D User Manual

Page 95

APPENDIX 1.

–How to run DDK-1700D UPnP

The DDK-1700D

supports the UPnP (Universal Plug and Play) protocol which makes it easier

for set-up. Follow these steps for UPnP use:

Figure 1 UPnP Setup Flow Chart

1. Check the IP class of your PC

In most case Microsoft Windows

will assign an IP address of 169.254.*.* automatically with a

subnet mask of 255.255.0.0 if the DHCP server is absent. The default IP address of a

DDK-1700D

is 192.168.1.168 with a subnet mask of 255.255.255.0. There won’t be any

communication due to different IP class domains and you have to modify the relative settings or

the UPnP protocol won’t work. It may be necessary to check you IP address. Follow this

procedure:

Step 1: From the Start menu, point to Settings, and then click Control Panel. See Figure 2.