IPX DDK-1700D User Manual
Page 72
72
4.1.3.8 PPPoE & DDNS
Using PPPoE
1. Install the XDSL software (obtained from your ISP dealer) on a PC.
2. Search DDK-1700D's IP address: you can connect the DDK-1700D to a Video monitor. The
monitor screen will show the IP address on the right side.
3. Turn off the DHCP function of the DDK-1700D if it is
“ON”.
4. Installing an IP address in your PC or notebook.
Desktop
Move the mouse to the Network neighborhood and click the right key of the
mouse
Choose properties
Choose your local connection
Choose the properties and
select the configuration
Select the TCP / IP
Choose the properties
Enter the IP
address in a quad
formula, for example “192. 168. 1.101” (the first three parts must be
identical to the above example. The last part can be changed to any number not to exceed
255)
Click on the mask and the mask input:
“255. 255. 255. 0” (a fixed formula)
Click
“OK”
Click “OK”.
5. Desktop
open browser
Enter the DDK-1700D
’s IP address in the URL
Enter
DDK-1700D will load.
PPPoE Settings
1.
Launch DDK-1700D
’s home page
Choose network
Enter User Name:
”root” and
Password: Admin
”
Click “OK’.
2.
Choose PPPoE
PPPoE mode: Select “ON”
Enter “Account”
Enter “Password”
Submit
Unplug the power connection.
3.
Power up the DDK-1700D to receive an IP address from the ISP (this IP address is dynamic
--- Each time the DDK-1700D is powered off and on a new IP address will be obtained).
Test:
1.
Desktop
IE browser
Enter the DDK-1700D IP address (as in the PPPoE settings in