IPX DDK-1700D - Manual (Page 20)

20
3.5 TCP/IP configuration setting
Click Start > Control Panel > Network Connections.
Select Internet Protocol (TCP/IP), and then click Properties.
Before completing installation to the LAN, make sure the Internet connection works properly.
If you are using a DHCP server, select Obtain an IP address automatically. Any assigned IP
address for the connected DDK-1700D must be in the same class type as the server. If there is
no DHCP server, please select specify an IP address and enter the IP address, subnet mask
and default gateway of your choosing to your PC. This IP address must be different from other
network IP devices but in the same class type.