IPX DDK-1800 - Manual (Page 50)

Changing the System Settings — Digital Input &Output.
1. Click on the DI and DO button on the left side of the “System” page to enter the “DI and DO” page.
2. Select the active state of the Digital Input 1 from the drop-down list.
3. Select the active state of the Digital Output 1 from the drop-down list.
4. Click to set the LED “On” or “Off’.
5. Select “ON” or “OFF” to enable or disable video output. Select “ON” or “OFF” to enable or disable
OSD output.
6. Click the Submit button to submit the new user’s settings.
Functions:
Digital Input:
Select “N.O.” or “N.C.” as the active state of the Digital Input, in order to
use the GPIO connector function.
Digital Output:
Select “N.O.” or “N.C.” as the active state of the Digital Output, in order to
use the GPIO connector function.
LED
Select “ON” or “OFF” to turn this function on and off.
VIDEO OUTPUT
Select “ON” or “OFF” to enable or disable video output.
OSD OUTPUT Select “ON” or “OFF” to enable or disable OSD output.
50